Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (2022)

Rainwater is the best resource for any homestead. Rainwater harvesting, directing, and storing rainwater for use later is a great way to be self-reliant as well as preserve a precious resource.

We all know that fresh water is a finite resource. The systems for preparing that water for irrigation and consumption are extensive, out of date, and sometimes even dangerous to our health. By directing rainwater or collecting it, you take some of the burden off those systems and you ensure the quality of the water you use for irrigation or, if desired, consumption.

The harvesting of rainwater is especially the case for those that are able to, and want to go, completely off-grid and this is a way to have access to water if you cannot access a well. As a part of homesteading, and basic preparedness, securing a sustainable water source is a tough challenge. Rainwater harvesting is a great strategy to ensure you can catch, store and use that water.

If you have heard of rainwater harvesting methods you know that there are many ways that this can be achieved. There are methods such as terracing, using cisterns, mulch basins and paving with natural materials. I have tried all of these and the most beneficial rainwater harvesting methods I have found are specifically to do with downspouts, which are easy and require very little work. The best methods for rainwater harvesting that I have seen produce the highest results are three different types of downspout systems such as fixed downspouts from the roof of a house, a downspout from a catchment structure in a garden, downspout and cistern from wide open areas, and of course, using earthworks to control the flow of rainwater for the garden.

Since these were the ones that gave me optimal rainwater catchment results, let’s take a closer look at those three downspout methods and the easy earthworks method.

Rainwater Harvesting Method #1 Downspouts

The simplest way is to put a splashdown style rain barrel beneath a downspout like what you see in the image below to feed a water supply for the garden.

Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (1)

Using a downspout system from the roof of a building is a very effective way of gathering large volumes of water that would otherwise go to waste. It is also very simple, just remember to place the rain barrel on a level surface elevated from the ground in order to create water pressure. We use different variations of this method at home as well as our urban farm.

It should be noted that with many types of rainwater harvesting methods, that the water needs to be filtered and processed if it is to be used as drinking water. For rooftop catchment systems, the rainwater will mix with a lot of the soot and dust and other bits that settles on rooftops, so filter those bits out and then use a purifying filter or boil the water.

How to stop one barrel from overflowing – Another type of rainwater harvesting barrel is one that diverts from a downspout. This can be a cleaner collection because the water goes directly from the downspout to the barrel without being exposed to debris (as long as your gutters are cleaned.

This method diverts the water from the downspout until the barrel is filled, any overflow proceeds down the downspout. You can link multiple barrels to collect more water.

(Video) RAINWATER COLLECTION FOR BEGINNERS | 16 Things To Know About Harvesting Rain Water BEFORE You Start

Rainwater Harvesting Method #2 Catchment Structure

Another collection method is constructing a catchment structure. We constructed one on our urban farm and placed a 550-gallon tank(RomoTech) beneath it which has been a really efficient way of easily catching large volumes of rainwater, and storing it, so that it doesn’t overflow quickly and can hold a good reservoir for the garden and dry periods.

Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (2)

How we made this rainwater harvesting system –The construction was quite simple. We dug post holes and cemented in 4×4 treated lumber at varying heights to create a slope, then we installed 2×4 bracing lumber to create a roof structure and support. We chose PVC panels for the roofing material because they were economical, easy to cut to our specifications and light in weight so we could maneuver them into position.

We then attached them to the structure with screws and used a silicone sealant over the screw heads to ensure the roof was watertight. We then installed a gutter on the lower end of the structure to catch the rainfall as well as downspouts and tubing to carry the water to the large tank.

We also created a smaller roof structure over our beehives (below) that serves the dual purposes of shielding the bees from most of the rain and snow we get and to create a collection point for rainwater.

Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (3)

Rainwater Harvesting Method #3 Large Surface Collection

A more historic example of rainwater collection is at Thomas Jefferson’s mountain top home of Monticello. Located in Charlottesville, Virginia. The American President installed large and long promenades on both sides of his large residence to combat the shortage of water access (below).

Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (4)

These promenades served a dual purpose; to allow him, his family, and guests to stroll outside the home in safety and comfort and to provide a large surface area to collect and direct rainwater. Jefferson had collection troughs installed on either side of the promenades that diverted water to underground cisterns. This water was used throughout the estate for irrigation as well as for consumption.

Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (5)

Rainwater Harvesting Method #4 Earthworks

Aside from collecting rainwater, you can also direct it and contain it by modifying the way the land controls water flow. Swales, ditches, and berms have been used for millennia to divert, collect and use rainwater effectively.

This method of rainwater harvesting is a great way for small backyard gardens to have a nourishing amount of wet soil after rain.You can see in the image below where a garden uses a rock creek and feeds the surrounding plants with water.

(Video) Rainwater Harvesting on a Small Structure - How To - Step by Step Guide

Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (6)

According to the dictionary, swales are “a low-lying or depressed and often wet stretch of land.” Digging out small or large stretches of earth, and then planting things (often food bearing plants and or trees) at the edge of these stretches creates a natural irrigation method. Prior to powered irrigation systems; ditches and swales were used by many ancient cultures as a means to divert rainwater as well as river or lake water to their agricultural crops.

Examples of this are Native American settlement sites that show ditches dug from points of a river to flatter areas where crops were grown as well as archaeological evidence from ancient Egypt that tell of diverting the annual floodwaters of the Nile to irrigate fields of grain.

Swales and ditches can be very utilitarian or can also be a very decorative part of a landscape. Some people make a feature of a dry creek bed in their yards so that the swale is not only functional to direct rainwater, but also very pretty.

How to automate your farm watering off-grid

If you go the route of rainwater harvesting, once the rainwater is stored, the uses are nearly limitless. One of the primary uses of this water is for irrigation. During dry periods with little rainfall, this stored water can be used to irrigate food crops without relying on municipal water supplies.

The setup below is what we use on our urban farm to automate the sprinkler systems in our greenhouses and veggie patches. With the rainwater storage and rainwater catchment unit, this is essentially an off-grid automatic watering setup for the farm.

Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (7)

Water can be extracted from storage to watering cans or to irrigation systems. On our urban farm, we use a combination of hand watering and a home built solar-powered irrigation system to water our crops (as seen below).

From our cistern under our collection roof, we have a lead hose that connects to a small, 12 volt, 70 watt transfer pump. The pump is connected to a battery which is charged by a nearby renogy100-watt solar panel kit.

From the transfer pump, the water then is diverted to different zones of the garden by way of a hose splitter. The water then travels to various areas of the garden where it irrigates the crops by way of drip and soaker irrigation hoses.

What are some other ways to use rainwater catchments?

Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (8)

Irrigation of food crops is one use for water collecting from rainwater harvesting, but it certainly isn’t the only use. Similar to grey water, the collected rainwater can also be used to water your lawn as well as your houseplants.

(Video) OFF GRID and using RAIN WATER | complete system walk through

The compost heap – Harvested water can also be of use at your compost heap. Periodic watering of a compost pile is essential to keep the aerobic process of breaking down garden and food scraps to rich, beneficial compost.

Water for animals – Fresh, clean, unchlorinated water is the best water for animals to consume. We use rainwater to provide our bees with drinking water all over our home garden as well as our urban farm. We use it to fill bird baths, a small, inground pond and smaller bowls and troughs where birds and bees and other creatures can sip safely. We also use collected rainwater for our chickens; they are better served with untreated water.

Washing – Collected rainwater can also be used for many tasks around the home or homestead. Harvested water can be directed to laundry facilities. The unchlorinated water can reduce wear and fading of dyed fabrics.

Trees – The resulting gray water can then be used to irrigate decorative trees and bushes around your property.

Showers and toilets – A handy person could re-direct the flow of water to bathtubs as well as toilets to use rainwater to bathe or to use for flushing the toilets. Some off the grid homes filter all the incoming rainwater and then store it in a small pressure tank. They then split the water into two separate paths – one path for potable (sanitized) and the other for non-potable water (un sanitized). A purification process is added to produce potable water.

This system has the advantage that it requires a much smaller unit and costs less, since it treats less water than a whole-house unit. The downside is that it requires a dual plumbing system – one to supply filtered but non-potable water to the toilets, clothes washer, irrigation faucets, etc., and one to supply potable water to the faucets.

This would be a great system to install as one is building a homestead but would be more difficult to retrofit.

Using rainwater as drinking water

The modern human digestive system, immune system, and for those in the US, the Environmental Protection Agency requires that water that will be consumed be made filtered and purified. This means the water must be treated in some way to sanitize it enough to be consumed, either directly or when used for cleaning vegetables or cooking them.

Before attempting to use rainwater for human consumption, it is important to test the collected water for environmental toxins, bacteria, pathogens as well as mineral content and particulate ratios. This will determine if you can reasonably purify the water for consumption and will inform you of the system or method that you can employ.

Is rainwater harvesting illegal? –This is a bit of a rumor that has spread on social media, however, many local governments encourage rainwater collection. In fact, in some places, such as Ohio, for instance, the local government offers rebates on rainwater collection barrels and tanks.

However, you will find that rainwater collection is a regulated practice, as it is something that can cause harm to nature if overdone, or to yourself. So be sure to check up on the laws in your local area here to see what those regulations are.

How to filter rainwater

There are many methods and stages of filtration and purification. The first is tight screening filtration as the water is collected so roof debris, grit, sand, or dirt is eliminated before the water is stored.

(Video) Rain Water Collection System | Zero Water Bill | How to Harvest Rain Water | WATCH TILL END

The cheapest way of purification once the water is stored is to add chlorine. For disinfection purposes, 2.3 fluid ounces of household bleach must be added per 1,000 gallons of water. Chlorine dosage rate will vary depending on the quantity of water to be treated, pH and temperature.

Once purified, it should go through a filter to eliminate the chlorine and other sediments. Faucet filters,as well as pitcher filters such as Zero Water or the Big Berkey Filter, will eliminate chlorine as well as other particulate matter from the water.

Water Collection Methods: How to Harvest & Use Rainwater - The Prepping Guide (9)

Various systems can also be purchased and installed in a home to purify rainwater. They employ various means of filtration and sanitation. Some systems expose water to intense ultraviolet light after filtration to purify the water. It is important to understand the amount of water and the light rate in each system and match it to the content of your collected water to ensure sanitation. Entry-level units will handle about 10 gallons per minute. The price of the unit will increase as options and flow rates increase.

Another filtration/purification system is what is called membrane filtration and involves pushing water through a layer of material under pressure. There are some subcategories of technology in this type of system. Pressure-driven membrane technologies include microfiltration (using a pore size of .03 to 10 microns), ultrafiltration (a membrane separation process using a pore size of approximately .002 to .1 microns), nanofiltration (an approximate pore size of only .001 microns) and reverse osmosis(filters to .001 microns). Reverse osmosis filter systems are the most compact and easily installed of the membrane filtration systems.

These systems can be quite costly to install and maintain and are not the “greenest” of solutions as they produce both byproducts, the particulate, bacterial, viral and mineral content that has to be managed (by changing and disposing of filters) as well as wastewater (water that cannot pass through the filter). Technologies are changing in this field to produce less waste, but they will always produce at least some.

At the top of the pile of purification processes is distillation. The process of distillation heats the water to boiling and then collects the condensation, thereby separating the water from the impurities.

This process is very energy intensive and loses about 5-10% of the water due to evaporation. The only contaminants that remain in the rainwater are volatile organic chemicals (VOCs) that evaporate easily. Therefore, some manufacturers of distillation systems include a final carbon filter to remove the VOCs.

A distillation system can run upwards to $4,000 and also uses electricity to heat the water and run the system so it is not the greenest of solutions either. However, there are some countertop water distillers that are coming onto the market that are much more affordable, such as the Megahome Countertop System.

It is important to do your homework before investing considerable effort and money into one of these systems, but they can be good tools to better use captured rainwater.

Rainwater harvesting is free and necessary

Fresh water is a finite resource on Earth. The amount of fresh, clean, contaminate free water is scarce. Many factors determine our access to this resource. The effects of climate change such as drought, globalization, corporate greed, and legislation impact our access to fresh water.

It is more important than ever to reduce our reliance on corporate and municipal sources for water. The municipal systems across the globe are aging and can be damaged easily. Corporate giants are gobbling up fresh water resources to purify and sell back to us.

(Video) Easy DIY Rain Water Catchment System

By diverting rainwater or by collecting it and using it for agricultural, household, animal, and human consumption we protect the environment, use its resources sensibly and we also take back a resource that is rapidly being co-opted and taken from us.


Which is the correct order for rainwater harvesting? ›

Catchment- Used to collect and store the captured rainwater. Conveyance system – It is used to transport the harvested water from the catchment to the recharge zone. Flush- It is used to flush out the first spell of rain. Filter – Used for filtering the collected rainwater and removing pollutants.

What are the steps to harvesting? ›

The four steps of harvesting are reaping, threshing, cleaning, and transporting. Utilizing cutting-edge technology to harvest crops is crucial since it decreases grain waste and improves grain quality and quantity. Reaping is the act of harvesting grain or pulses by cutting them with a scythe, sickle, or reaper.

What is rainwater harvesting explain with diagram? ›

Rainwater harvesting (RWH) is the collection and storage of rain, rather than allowing it to run off. Rainwater is collected from a roof-like surface and redirected to a tank, cistern, deep pit (well, shaft, or borehole), aquifer, or a reservoir with percolation, so that it seeps down and restores the ground water.

What are the 8 rainwater harvesting? ›

Rain water harvesting is collection and storage of rain water that runs off from roof tops, parks, roads, open grounds, etc. This water run off can be either stored or recharged into the ground water.

What is rainwater harvesting essay? ›

Rainwater Harvesting is one of the most commonly used methods to save water. It refers to storing of rainwater for various uses. The notion behind rainwater harvesting is to not waste the rainwater and prevent it from running off. In other words, it is done to collect rainwater using simple mechanisms.

What is rain water harvesting PDF? ›

Rainwater harvesting describes processes in which precipitation that falls on a site is diverted, captured, and stored for use on-site, as opposed to allowing it to run off, evaporate, or infiltrate into the soil. Depending on its intended use, the captured precipitation may require treatment.

What is importance of rainwater harvesting? ›

Storing rainwater helps in recharging the aquifers. It helps in preventing urban flooding due to excess rain. The stored water can be used for irrigation practices in farming region. The water can be used for daily use and help in reducing water bills in the towns and cities.

What is rainwater harvesting project? ›

The Rainwater harvesting is the simple collection or storing of water through scientific techniques from the areas where the rain falls. It involves utilization of rain water for the domestic or the agricultural purpose. The method of rain water harvesting has been into practice since ancient times.

Which method of rainwater harvesting is more effective? ›

Roof top rain water harvesting can be a very effective tool to fight the problem of water shortage particularly in urban areas. Roof top rain water harvesting depends upon the amount of rainfall and the roof top area. More the amount of rainfall more is the harvested water from roof top.

How do you use rainwater? ›

Collecting and using rainwater can be a great way to conserve resources. Some people use rainwater for watering plants, cleaning, bathing, or drinking. However, it is important that the rainwater system is maintained properly and the water quality is appropriate for the intended use.

How can you collect rain water and reuse it? ›

To collect as much of the rainwater as possible, install a larger tank or connect several rain barrels together so that the overflow from a full barrel can be routed into empty barrels. An overflow outlet at the top of the barrel can be designed to channel the excess water when the barrel is full.

What are 10 ways to save water 7? ›

Question: Enlist some methods to conserve water.

Repairing leaking pipes and taps. Not wasting water during brushing teeth, shaving, bathing, washing clothes and during other activities. Rainwater harvesting. By drip irrigation of plants.

What are the 7 steps of farming? ›

The 7 steps involved in agricultural practices are mentioned below:
  1. Ploughing.
  2. Sowing.
  3. Adding nutrients.
  4. Irrigation.
  5. Protecting plants.
  6. Harvesting.
  7. Storage.

What are 5 kinds of harvesting tools? ›

The most common type of harvesting implement are small sickle, big sickle, darat, gandasa and small axe etc., (Fig. 9.9a, b, c & d). The hand sickle is used to harvest crops like wheat, maize, barley, pulses and grass etc.

What are 3 important things in harvesting? ›

The Process of Harvesting

Harvesting can be separated into three steps. The plant part of interest must be identified, detached from the rest of the plant, and then collected in a container suitable for transport from the field.

What is rainwater harvesting in 50 words? ›

This technique is mostly used to prevent water loss during irrigation. Rooftop rainwater harvesting, slopes, water collection reservoirs, trenches, surface water collection, underground tanks, dams, barrages, and other techniques are used.

What is rainwater harvesting answer 10? ›

Rain water harvesting is a technique of collection and storage of rainwater into natural reservoirs or tanks, or the infiltration of surface water into subsurface aquifers (before it is lost as surface runoff).

How do you explain water harvesting? ›

The term 'water harvesting' generally refers to the collection of rainstorm-generated runoff from a particular area (a catchment) in order to provide water for human, animal, or crop use.

What does rainwater harvesting Class 7 mean? ›

Rainwater harvesting is a simple strategy by which rainfall is collected and conserved for future usage. It includes collection and conservation of rainwater with the aid of artificially manufactured techniques, that runs off natural or man-made catchment regions, for example rooftop, rocky surface or hill slopes.

What are the 10 disadvantages of rainwater harvesting? ›

What are the Disadvantages of Rainwater Harvesting?
  • Unreliable Rainfall. ...
  • Rainwater storage tanks can take up valuable space around your house. ...
  • Inability to install an efficient and effective system. ...
  • Capital cost of rainwater harvesting systems can be high. ...
  • Requires some technical skill to install system.
19 Aug 2022

What is water harvesting 100 words? ›

Rain Water Harvesting Essay 1 (100 words)

Rain water harvesting is a technique used for collecting and storing rainwater by using various means in different resources for the future use purpose (like cultivation, etc). Rain water can be collected into the natural reservoirs or artificial tanks.

What are the 2 types of rainwater harvesting? ›

There are two ways of harvesting rainwater, namely; surface runoff harvesting and rooftop rainwater harvesting.

What are the three parts of rain harvesting system? ›

The common components of a rainwater harvesting system involved in these stages are illustrated here.
  • Catchments: The catchment of a water harvesting system is the surface which directly receives the rainfall and provides water to the system. ...
  • Coarse mesh at the roof to prevent the passage of debris.
  • Gutters: ...
  • Conduits.

What are 20 ways to save water? ›

20 Ways to Save Water
  1. Use a displacement device (a water-filled bottle) in the toilet tank to reduce the amount of water required to flush.
  2. Use toilet only for its intended purpose. ...
  3. Repair leaky taps or toilets immediately. ...
  4. Consider a small capacity toilet when replacing an old one.
  5. Take shorter showers.

What are 50 ways to save water? ›

50 Ways to Conserve Water
  • When watering plants, apply water only as fast as the soil can absorb it.
  • Use sprinklers that deliver big drops of water, close to the ground.
  • Use a water-conserving icemaker.
  • Teach children to turn off faucets tightly after each use.
11 May 2022

What are 100 ways to save water? ›

100 Ways to Save Water
  1. When washing dishes by hand, don't let the water run while rinsing. ...
  2. Evaporative coolers require a seasonal maintenance checkup. ...
  3. Adjust sprinklers so only your lawn is watered and not the house, sidewalk, or street.
  4. Run your dishwasher only when it is full and you could save 400 gallons a month.

What is rainwater harvesting How is it done short answer? ›

Rain water harvesting is collection and storage of rain water that runs off from roof tops, parks, roads, open grounds, etc. This water run off can be either stored or recharged into the ground water.

How rainwater harvesting is done in India? ›

Some ancient rainwater harvesting methods followed in India include madakas, ahar pynes, surangas, taankas and many more. This water conservation method can be easily practiced in individual homes, apartments, parks, offices and temples too, across the world.

What is rainwater harvesting class 7? ›

Answer: Rainwater harvesting is a simple and economical way of preserving rainwater that falls on earth. It involves collection of rainwater on the roofs of the buildings and storing it underground for later use.

What is rainwater harvesting class 6? ›

Ans: Rainwater harvesting is the collection of rainwater and storing for future use. In this system rainwater in collected from the rooftops by means of pipes into storage tank for later use.

What do you know about rainwater harvesting 10? ›

Rain water harvesting is a technique of collection and storage of rainwater into natural reservoirs or tanks, or the infiltration of surface water into subsurface aquifers (before it is lost as surface runoff).

How important is rainwater harvesting? ›

It reduces soil erosion and flood hazards by collecting rainwater and reducing the flow of stormwater to prevent urban flooding. Most buildings that utilize rainwater harvesting systems have a built-in catchment area on top of the roof, which has a capacity of collecting large volumes of water in case of rainstorms.

Which is the best method of water harvesting? ›

Use rainwater effectively.

Storage techniques (such as external catchments or roof top collection) increase the availability of water in the drier seasons. They also harvest water from a wider area making more water available to the crop.

What is rainwater harvesting 100 words? ›

Paragraph on Rainwater Harvesting in 100 Words

This technique is mostly used to prevent water loss during irrigation. Rooftop rainwater harvesting, slopes, water collection reservoirs, trenches, surface water collection, underground tanks, dams, barrages, and other techniques are used.

What is the main purpose of rainwater harvesting class 10? ›

The main purpose of rainwater harvesting is to save and conserve water for future use.

What is harvesting Class 8 in short? ›

Cutting of crops is known as harvesting. Harvesting is either done manually by a sickle or by a machine called harvester.

How can we conserve water in class 8? ›

Keeping the tap closed when not in use. Check for the openings or leaks in water distribution pipes. Make sure to use collected rainwater for gardening or washing purpose. Always have a measure of how many buckets of water is wasted in a day and try to reduce.


1. Water Collection for Survival? You need to check this technique out!
(Coalcracker Bushcraft)
2. 3 Way To Make Rainwater Drinkable
(Homesteadin' Hawai'i)
3. How To Build A Rainwater Collection System
(Deco Bliss)
4. Stored Water Gone Bad - How to Store Water That Never Needs to Be Rotated
(The Provident Prepper)
5. A store for preppers...Rain water collection heaven.
6. Is Collecting Rainwater Actually Illegal in The US?
(Rogue Preparedness)

Top Articles

You might also like

Latest Posts

Article information

Author: Foster Heidenreich CPA

Last Updated: 11/08/2022

Views: 5679

Rating: 4.6 / 5 (56 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Foster Heidenreich CPA

Birthday: 1995-01-14

Address: 55021 Usha Garden, North Larisa, DE 19209

Phone: +6812240846623

Job: Corporate Healthcare Strategist

Hobby: Singing, Listening to music, Rafting, LARPing, Gardening, Quilting, Rappelling

Introduction: My name is Foster Heidenreich CPA, I am a delightful, quaint, glorious, quaint, faithful, enchanting, fine person who loves writing and wants to share my knowledge and understanding with you.